- This topic is empty.
-
Posts
-
We installed 3 Harbor Breeze Mazon fans/lights, model MZ44BNK3LR, item 0807421.
When activated with the wall switch to turn on the light, the light comes up normally and then some time (10-15 min) later the light goes out, stays out a few seconds, then back on. Fans, lights work normally with the remote. We had other ceiling fans in the same rooms with incandescent bulbs, never observed this with those units (Hunter fans).
I pulled them back down and rechecked the wiring connections (my first thought), but all 3 wired per the instructions, light units plugs oriented correctly (pin to pin).
Its a mystery – any help would be greatly appreciated!
Thanks!
We also installed three Mazon fans with built-in LED lights. On one of them, the lights quit working. When you remove the globe, you can see half of them barely lighting up when the switch is on. They have worked correctly for about 3 years, until now. Sometimes we can hold down the light button for the dimmer and it will come on full, then immediately go back off. I don’t think LEDs should go out that soon, and I also can’t seem to find a replacement light part for it.
We have the Beach Creek model and have the same problem. It also has the LED lights. Every few minutes the lights cut out and then back on. It’s not really a flickering, just a short blink. Fan works fine. We’ve had this fan installed for probably 2 years, and this fan has worked fine until now. Did you ever find a solution?
